IC / ISL6228HRTZ / QFN-28

تولید کننده: Intersil
مدل کالا: ISL6228HRTZ
تماس 8893- 6186
قیمت: 0تومان

ISL6228HRTZ - Intersil - QFN-28

High-Performance Dual-Output Buck Controller for Notebook Applications

عملکرد بالا برای خروجی های برنامه کاربردی نوت بوک

The ISL6228 IC is a dual channel synchronous-buck PWM controller featuring Intersil's Robust Ripple Regulator (R3
technology that delivers truly superior dynamic response to input voltage and output load transients. Integrated MOSFET drivers and bootstrap diodes result in fewer components and smaller implementation area Intersil’s R3 technology combines the best features of fixedfrequency and hysteretic PWMs while eliminating many of their shortcomings. R3 technology employs an innovative modulator that synthesizes an AC ripple voltage signal VR analogous to the output inductor ripple current. The AC signal VR enters a window comparator where the lower threshold is the error amplifier output VCOMP, and the upper threshold is a programmable voltage reference VW, resulting in generation of the PWM signal. The voltage reference VW sets the steady-state PWM frequency. Both edges of the PWM can be modulated in response to input voltage transients and output load transients, much faster than conventional fixedfrequency PWM controllers. Unlike a conventional hysteretic converter, each channel of the ISL6228 has an error amplifier that provides ±1% voltage regulation at the FB pin The ISL6228 has a 1.5ms digital soft-start and can be started into a pre-biased output voltage. A resistor divider is used to program the output voltage setpoint. The ISL6228 operates in continuous-conduction-mode (CCM) in heavy load, and in diode-emulation-mode (DEM) in light load to improve light-load efficiency. In CCM, the controller always operates as a synchronous rectifier. In DEM, the low-side MOSFET is permitted to stay off, blocking negative current flow into the low-side MOSFET from the output inductor




High performance R3 technology
Fast transient response
±1% regulation accuracy: -40°C to +100°C
Individual power stage input rail for each channel
Wide input voltage range: +3.3V to +25V
Output voltage range: +0.6V to +5V
Diode emulation mode for increased light load efficiency
Programmable PWM frequency: 200kHz to 600kHz
Pre-biased output start-up capability
Integrated MOSFET drivers and bootstrap diode
Internal digital soft-start
Power good monitor
Fault protection
- Undervoltage protection
- Soft crowbar overvoltage protection
- Inductor DCR overcurrent protection
- Over-temperature protection
- Fault identification by PGOOD pull-down resistance
Pb-free (RoHS compliant




General purpose switching buck regulators
PCI express graphical processing unit
Auxiliary power rail
Network adaptor


برای دانلود دیتاشیت اینجا کلیک کنید

نوشتن نظر

نام شما:

نظر شما: توجه : HTML ترجمه نمی شود!

رتبه: بد            خوب

کد امنیتی را در کادر زیر وارد نمایید: